Windows
Windows 2.5.0
New
- Alerts on your phone: a watched callsign, a needed country or a DXpedition on the cluster can now also reach your phone within seconds, through the free ntfy app or Telegram. Settings › Alerts › Also on my phone. DX SkyView at home sends it; no account and no extra cost.
- The radio connects by itself: in Settings › Radio tick Use radio control, and DX SkyView finds the program that has your radio (N1MM Logger+, DXLog, N3FJP, DXLab Commander, Ham Radio Deluxe, OmniRig, flrig, rigctld) or the radio itself on its USB cable, with model, port and speed. Nothing to choose and no port numbers to remember. One status line says what it is connected to, and it names the one line to enter in WSJT-X and the other programs it sees running. The button Find my set-up looks again; the choices by hand are folded away under "Set it up by hand".
- More programs: DX SkyView now reads the frequency and tunes through DXLab Commander, Ham Radio Deluxe and OmniRig (Windows; the radio sharing used by Log4OM, Swisslog and many others).
- N3FJP, WSJT-X and the map together: while DX SkyView has the radio, it keeps N3FJP's frequency and mode up to date, and a DX spot clicked in N3FJP tunes the radio. N3FJP needs no radio connection of its own.
- Help: a "Which set-up is mine?" table for every supported program.
- DX cluster spots in band colours: each spotted country blinks in the colour of its band, the same colours as Heard and Digital, with a key on the map. A country spotted on several bands shows one stripe per band. Countries you need keep a gold ring, watched callsigns a green one. One colour as before: Settings › Map › Cluster spot colours.
- Two radios in N1MM Logger+ or DXLog (SO2R): the map shows both radios and marks the one in focus, with nothing to set. A click on a spot tunes the radio that is already on that band, and the spot list says which radio each spot goes to.
- Several radios on their own cables: DX SkyView lists the radios it finds and you pick one. It never guesses.
- Using the radio through DX SkyView: under the status line, a list of the programs that share the radio (WSJT-X, N3FJP and others), each with its state.
- When the radio stops answering, DX SkyView looks by itself for a running logger or radio program and connects through it, so switching between your logger and the direct connection needs no settings.
- Digital: a Show choice in the Digital box on the map: Everything, Only my radio, or Without my radio. One click instead of three ticks in Settings.
- A key of the marks: the Digital box now explains every mark on the map (dot, the two kinds of diamonds, lines, gold ring, the near-you circle). DX cluster and Satellites have a key too. A key is on the map while its button is on.
Improved
- DX SkyView never keys the radio. It opens the radio's port itself and holds the RTS and DTR lines off, so a radio that transmits on those lines (for example a Kenwood TS-590SG set up for digital modes over USB) is not keyed. While N1MM Logger+ or DXLog is running, DX SkyView opens no radio port at all and connects through the logger.
- The menu bar at the top of the window is always visible (no Alt key), and its Help menu is now called Support: Licence, Report a problem, Check for updates, Open log folder, About. The Help button on the map is the manual.
- The connection to the radio rides out short gaps instead of dropping.
- When a logger does not move the radio after a click on a spot, DX SkyView says so.
- A Copy button for the address that WSJT-X and your logger use to share the radio.
Windows 2.4.0
New
- Radio control without extra programs: DX SkyView now has Hamlib built in. Choose your radio model, its USB or serial port and speed in Settings › Radio, and it connects to the radio by itself (more than 300 radios, e.g. Yaesu FTDX101D, Kenwood TS-590SG).
- Logger link: when N1MM Logger+, DXLog or N3FJP has the radio, DX SkyView reads the frequency from the logger, and a click on a spot tunes the radio through the logger. No cable, no flrig. Works on the same computer or over your home network.
- Follow the radio: besides the coverage map and the beacon band, the cluster spots and Digital can now show only the band the radio is on (each with its own switch in Settings › Radio).
- My own radio (WSJT-X): the stations WSJT-X decodes on your radio appear on the map as diamonds with a line from your QTH, with the signal report and distance, and a "My radio" column in the Digital key. See at a glance what you really hear. One tick, no setup in WSJT-X, also next to JTAlert, GridTracker or a logger. Settings › Activity › Digital.
- Radio, logger and WSJT-X together: with the built-in connection, DX SkyView shares the radio with WSJT-X and your logger on the standard Hamlib address 127.0.0.1:4532. Settings › Radio shows what to enter in each program.
- Digital: "Lines from the last" (2, 3, 5 or 15 minutes, default 5) keeps the who-decodes-whom lines fresh.
Improved
- Settings › Radio is grouped by how you connect: built in, through your logger, or through rigctld/flrig.
- rigctld and flrig addresses now default to 127.0.0.1 instead of localhost, which some Windows PCs could not reach.
Windows 2.3.0
New
- Digital: a new button for FT8, FT4 and the other digital modes, live from PSK Reporter. See who is on the air now on every band, what the stations near you decode (stations, countries, the farthest one, per band), and lines showing who decodes whom around you or any place you pick.
- Stations from countries you still need are marked with a gold ring, with an alert when one is decoded near you (Premium).
Windows 2.2.0
New
- After a crash, DX SkyView asks once whether to send its log to the team. Nothing is sent without your yes.
- Rotator dial: a small compass for each rotator on the map, in the antenna's colour. Click on it to turn the antenna, with − and + (5°) and Stop. Move it with Move the panels; switch it off in Settings › Rotators.
- Change callsign in the licence window, for when you need a key for another callsign.
Improved
- Many more DX cluster nodes to choose from, grouped by region (all checked to be working).
- A node you type in yourself is remembered: once it has connected, it appears under "My nodes" at the top of the list (the last five).
- Where am I heard is live: your PSK Reporter and Reverse Beacon reports appear within seconds instead of every 5 minutes.
- The DX cluster keeps one steady connection to your node and never logs in without your callsign. If your node sends no spots, DX SkyView says so and shows spots from another node meanwhile.
- The toolbar stays on one row: buttons that don't fit go into a More menu.
- Sunrise and sunset in the clock font, easier to read.
- Shorter Settings tab name (Beacons & more).
Fixed
- The X-ray reading no longer drops out when NOAA's file is being updated; DX SkyView tries again a minute later.
- DX SkyView now uses only dxskyview.com for updates, licences and problem reports.
Windows 2.1.2
Fixed
- The map redraws much faster when new spots or space weather come in. DX SkyView now uses less of the processor, mostly on big screens and with the graphics card switched off.
- Band openings now no longer slows the map down while you move the mouse.
- The MUF map no longer makes the window pause for a moment when it is worked out again.
- A rotator that was asked to stop keeps its Stop command when DX SkyView closes or the computer goes to sleep right after.
- The map no longer shows an antenna as turning when its controller is not connected.
- If the map page keeps crashing, DX SkyView stops reloading it after three tries instead of trying for ever.
Windows 2.1.1
New
- Move the panels: put the info box, the map keys and the strips anywhere on the map. Settings › Map › Panels on the map.
- New home, dxskyview.com: DX SkyView gets its own web site. Updates, licence activation and problem reports now work through dxskyview.com too, so you keep getting updates after the move. Help › DX SkyView web site opens dxskyview.com.
Fixed
- The info box is always on top, so other panels no longer hide part of it.
Windows 2.1
New
- Radio control (CAT): DX SkyView shows your radio's frequency on the map and tunes the radio when you click a spot, a park or a summit, and can turn the antenna too. The map follows the radio's band. Works with Hamlib rigctld and flrig. Settings › Radio.
- Band openings now: the new Openings button shows where each band is open right now, from the live reports of all stations on PSK Reporter: from your area, or a sample of the whole world.
- POTA and SOTA: the new POTA/SOTA button shows activators on the air in parks and on summits, with frequency and mode.
- Heard: choose which bands to show (click the band chips under the map), show the last 15 minutes, 30 minutes, 1 hour or 2 hours, and Reset to show only new reports. Band colours are easier to tell apart.
- Rotators: the beam line is thicker, with a dark outline, and its thickness can be set for each rotator.
- Settings › Activity: Heard, Openings and POTA/SOTA settings in one place.
Fixed
- After deactivating the licence there was no way back to the map. The licence page now always has a Back to the map button (and View › Back to the map, Ctrl+M).
- The toolbar no longer hides buttons such as Heard or Coverage on narrower screens: they move to a second row instead.
- Fewer "X-ray not available" gaps: a cut-off answer from NOAA is fetched again, and the last good data stays on screen.
- Steadier rotator connections across sleep and wake, and a note in the log if the computer stopped unexpectedly.
Windows 2.0.1
- DXpeditions: a new map layer shows DXpeditions on the air now and coming in the next 30 days, from NG3K's calendar (used with permission). Needed ones are gold.
- Big screens and TVs: much lower CPU/GPU use, and the toolbar stays on one line.
- DX cluster: two computers at home can now use the same node and callsign at the same time.
- DX cluster: when the cluster is offline, spotted prefixes stop blinking and fade, so you can see at a glance that it is not connected.
- DX cluster status: Settings › Cluster now shows whether DX SkyView is connected to the node, as which callsign, and when the last spots came in, with a Connect now button.
- Update from Club Log: My DXCC can download your QSOs and confirmations straight from Club Log, once or every day. You paste a token from your Club Log settings; no password is needed.
Windows 2.0
New
- Settings, regrouped: Station, Map, Cluster, Alerts, My DXCC, Beacons & satellites, Rotators and Data. Each tab says what it's for, and premium settings are marked.
- Alerts tab: every alert in one place, with the sound and notification choices at the top.
- Band opening alerts: DX SkyView tells you when a band opens to a country you need or choose, now or in the next two hours, above the chance you set.
- Coverage that follows your antenna: in Station › Antennas by band, pick the rotator that turns each antenna. The coverage map then uses the antenna's real heading and beam, and updates when you turn it.
- NCDXF beacons: the Beacons button shows the 18 beacons, marks the one on the air now on your chosen band with a line from your QTH, and lists who is on each band right now. A schedule table (on or off in Settings) shows every beacon, frequency and power step, with a countdown to each one's next turn.
- Satellites: the Satellites button shows the ISS and the popular FM and linear satellites, with their tracks and footprints. Point at one for its next passes over your QTH and its frequencies. An alert 5 minutes before a good pass is in Alerts.
- X-ray and radio blackouts: a new X-ray tile shows the solar flare level. During a blackout (R1 or more), the daylight side is shaded red, and R2 or more gives an alert.
- Greyline planner: the info box shows today's times when the greyline crosses both you and the other station.
- Where am I heard: the Heard button shows the stations that received your callsign in the last hour, from PSK Reporter and the Reverse Beacon Network, coloured by band.
- Update from LoTW: My DXCC can download your QSOs and confirmations straight from ARRL LoTW, once or every day.
- MUF map: more accurate, using the effective sunspot number fitted to today's ionosonde readings.
Fixed
- The DX cluster shows its spots sooner after the app starts.
- Alerts for watched callsigns and needed countries work with the Cluster button off.
Windows 1.9.2
Fixed
- Alerts for watched callsigns and needed countries work again with the DX cluster layer turned off. The spots stay hidden from the map, but the app keeps listening and alerts you.
New
- Settings › Cluster › Alerts: choose which needed countries alert you. "New country" means a country that isn't in your log on any band. "New band" means a country that isn't in your log on that band. Needed-country alerts use your log from My DXCC.
- Turning the Cluster button off while alerts are set shows a short note that the alerts stay on.
- The MUF map is more accurate and no longer runs too high: it uses KC2G's effective sunspot number, fitted to today's ionosonde readings, instead of the daily sunspot count.
Windows 1.9.1
Fixed
- The info box opens only when the pointer is on a country prefix again. To get info and predictions for any spot on the map, turn on Settings › Look › "Show info and predictions wherever the pointer rests".
- The info box stays narrower: long lines wrap downwards instead of making the box wide.
Windows 1.9
New
- Point anywhere on the map, not only at a country label: the info box and the prediction wheel show that 2° square, for example the New York area instead of the middle of the USA.
- With coverage on, the info box shows the exact coverage figure for that place.
- Six new map styles: Terrain, Midnight, Deep teal, Old map (parchment), Arctic and Desert.
- Clock colour: choose it in Settings › Clocks.
- Help › Donate for a licence (PayPal) opens the donation page. The Licence page has the same link.
Windows 1.8
New
- Antennas by band. In Settings › Station, choose the antenna and its height above ground for each band from 160 to 6 m. Predictions and coverage now use the real gain of that antenna at each take-off angle, so a low dipole and a high Yagi give different results, on short and long paths.
Fixed
- The serial port list in Settings › Rotators updates by itself when you plug in a cable.
Windows 1.7.1
New
- The Settings panel can be made wider: drag its left edge, or click ⤢. On a wide screen the settings are shown in several columns, so there is less scrolling.
- Settings › Rotators warns you when two rotators are set to the same serial port.
Fixed
- The rotator settings refresh when you change a port.
Windows 1.7
New
- Antenna rotators (premium). Connect your rotator controller by USB and add it in Settings › Rotators. DX SkyView supports Yaesu GS-232A and GS-232B controllers and interfaces (including ERC and K3NG), Prosistel D and F controllers, and Hamlib rotctld over the network. Up to 4 rotators.
- Each antenna's beam is drawn on the map from your QTH in its own colour: the heading with arrows, the covered area shaded between the beam-width edges and, if you like, the long path. The antenna's name is shown on the beam.
- Soft start and stop for Yaesu (GS-232) controllers: the rotator starts slowly, speeds up, and slows down again before the target and when you press Stop.
- Right-click a country, a spot or any place on the map and choose the antenna (listed by its name and colour) and the short or long path, or Stop all rotators. The antenna turns, and the map follows it.
- A box at the top right shows each antenna's heading. Type a heading and press Enter to turn, or click Stop.
Windows 1.6
New
- The map now fills the window, with no black bars at the sides. Drag the map to see the edges. Settings › Map › Map size also offers Whole map and Stretch.
- New map style Outline (borders only): just coastlines and borders on grey, ideal under the MUF map.
- Coastline and border colour and strength, and Draw borders over the MUF map, so the world stays visible under the MUF colours.
- Choose the colour of each MUF level (3.5 to 35 MHz).
- Choose the font, size and colour of the latitude and longitude numbers.
- The font lists show every font installed on your computer.
- A welcome window on first start asks for your callsign and locator, so the DX cluster can log in with your call.
- New installations start with the classic blue map, prefixes, CQ zones, day/night, aurora and the DX cluster on.
Changed
- The solar wind tile was removed from the space weather panel.
Windows 1.5
New
- Font, size, bold and colour for the prefix labels, and for the CQ and ITU zone numbers.
- Colours for the CQ and ITU zones and their lines, and for cluster spots, needed countries and watched callsigns.
- Clock font, size, bold and seconds.
- A list of DX cluster nodes to choose from (VE7CC, DL9GTB, GB7MBC, W3LPL, K1TTT, NC7J, DXFun), or your own node.
- Cluster login commands, for example
set/nofilter. - Choose how often space weather refreshes, and whether the MUF map uses live ionosondes or the model only.
Windows 1.4
New
- Help › Report a problem… sends your message and the app's log to 5B4AOF, with your email if you'd like a reply.
- You can enter your licence key at any time, also during the trial, with the trial badge or the "Enter licence key…" button in the toolbar.
Windows 1.3
New
- A licence key works on 2 computers. To move it, click Deactivate on this PC in Help › Licence… on the old computer, then enter the key on the new one.
Windows 1.2
New
- My DXCC: import your log (ADIF) to see which countries you have worked and confirmed.
- Spots of countries you still need blink in gold, and you can show only those.
- Watched callsigns blink green and are listed at the top of the map, with a sound and a notification when they are spotted.
- The DX cluster logs in with your own callsign, and you can choose the node.
- Update now: DX SkyView tells you when a new version is ready and installs it for you.
Windows 1.1.1
Fixed
- The map could turn black after a few minutes on some PCs.
New
- View › Use graphics card, and Help › Open log folder.
Windows 1.1
New
- A 30-day trial with all features, and licence keys.
The first Windows version (1.0)
- DX SkyView as a Windows program, with its own window and Start menu entry: live world map, greyline, aurora, MUF map, DX cluster, space weather and ITU-R P.533 propagation predictions.
# Manual
One section for each feature, always in the same order: What it shows, Turn it on, How to use it, Settings and Good to know. Features marked *Premium* need the 30-day trial or a licence key.
Mac
Mac 2.5.1
- Fixed: the DX cluster key and the Satellites key are now in the same column as the other keys at the bottom left, so no key hides another.
Mac 2.5.0
New
- The radio connects by itself: in Settings › Radio tick Use radio control, and DX SkyView finds the program that has your radio (MacLoggerDX, N1MM Logger+ or DXLog on a PC in your network, N3FJP, flrig, rigctld) or the radio itself on its USB cable, with model, port and speed. Nothing to choose. One status line says what it is connected to, and Find my set-up looks again; the choices by hand are folded away under "Set it up by hand".
- Alerts on your phone: a watched callsign, a needed country or a DXpedition on the cluster can now also reach your phone within seconds, through the free ntfy app or Telegram. Settings › Alerts › Also on my phone. DX SkyView at home sends it; no account and no extra cost.
- DX cluster spots in band colours: each spotted country blinks in the colour of its band, the same colours as Heard and Digital, with a key on the map. A country spotted on several bands shows one stripe per band. Needed countries keep a gold ring, watched callsigns a green one. One colour as before: Settings › Cluster › Colour the spots by band.
- Two radios in N1MM Logger+ or DXLog (SO2R): the map shows both radios and marks the one in focus, with nothing to set. A click on a spot tunes the radio that is already on that band, and the spot list says which radio each spot goes to.
- Several radios on their own cables: DX SkyView lists the radios it finds and you pick one. It never guesses.
- Using the radio through DX SkyView: under the status line, a list of the programs that share the radio (WSJT-X and others), each with its state.
- Digital: a Show choice in the Digital box on the map: Everything, Only my radio, or Without my radio. One click instead of three ticks in Settings.
- A key of the marks: the Digital box now explains every mark on the map (dot, the two kinds of diamonds, lines, gold ring, the near-you circle). DX cluster and Satellites have a key too. A key is on the map while its button is on.
- Help: a "Which set-up is mine?" table for every supported program.
Improved
- DX SkyView never keys the radio. It opens the radio's port itself and holds the RTS and DTR lines off, so a radio that transmits on those lines (for example a Kenwood TS-590SG set up for digital modes over USB) is not keyed. While MacLoggerDX (or another Mac logger that keeps the radio) is running, DX SkyView opens no radio port at all.
- The menu Support (Licence, Report a problem, Check for updates, Open log folder, About) has the same name on every computer. The Help button on the map is the manual.
- The connection to the radio rides out short gaps instead of dropping.
- When N1MM Logger+ or DXLog does not move the radio after a click on a spot, DX SkyView says so.
- A Copy button for the address that WSJT-X and your logger use to share the radio.
Mac 2.4.0
New
- Radio control without extra programs: DX SkyView now has Hamlib built in. Choose your radio model, its USB or serial port and speed in Settings › Radio, and it connects to the radio by itself (more than 300 radios, e.g. Yaesu FTDX101D, Kenwood TS-590SG).
- Logger link: when N1MM Logger+, DXLog or N3FJP has the radio (on a Windows PC in your network), DX SkyView reads the frequency from the logger, and a click on a spot tunes the radio through the logger. No cable, no flrig.
- Logger link for MacLoggerDX: reads the frequency and tunes through MacLoggerDX.
- Radio, logger and WSJT-X together: with the built-in connection, DX SkyView shares the radio with WSJT-X and your logger on the standard Hamlib address 127.0.0.1:4532. Settings › Radio shows what to enter in each program.
- My own radio (WSJT-X): the stations WSJT-X decodes on your radio appear on the map as diamonds with a line from your QTH, with the signal report and distance, and a "My radio" column in the Digital key. See at a glance what you really hear. One tick, no setup in WSJT-X, also next to MacLoggerDX's WSJT-X logging, JTAlert or GridTracker. Settings › Activity › Digital.
- Follow the radio: besides the coverage map and the beacon band, the cluster spots and Digital can now show only the band the radio is on (each with its own switch in Settings › Radio).
- Digital: "Lines from the last" (2, 3, 5 or 15 minutes, default 5) keeps the who-decodes-whom lines fresh.
Improved
- Settings › Radio is grouped by how you connect: built in, through your logger, or through rigctld/flrig.
- rigctld and flrig addresses now default to 127.0.0.1.
Mac 2.3.0
- New: Digital. A new button for FT8, FT4 and the other digital modes, live from PSK Reporter. See who is on the air now on every band, what the stations near you decode (stations, countries, the farthest one, per band), and lines showing who decodes whom around you or any place you pick.
- New: needed countries in Digital. Stations from countries you still need are marked with a gold ring, with an alert when one is decoded near you (Premium).
Mac 2.2.0
- New: after a crash, DX SkyView asks once whether to send its log to the team. Nothing is sent without your yes.
- Improved: many more DX cluster nodes to choose from, grouped by region (all checked to be working).
- New: rotator dial. A small compass for each rotator on the map, in the antenna's colour. Click on it to turn the antenna, with − and + (5°) and Stop. Move it with Move the panels; switch it off in Settings › Rotators.
- Improved: Where am I heard is live. Your PSK Reporter and Reverse Beacon reports appear within seconds instead of every 5 minutes.
- New: Change callsign in the licence window, for when you need a key for another callsign.
- Improved: shorter Settings tab name (Beacons & more).
- Fixed: the X-ray reading no longer drops out when NOAA's file is being updated; DX SkyView tries again a minute later.
- Changed: DX SkyView now uses only dxskyview.com for updates, licences and problem reports.
Mac 2.1.2
- Fixed: much less work for the processor. With the DX cluster and beacons on, DX SkyView kept the processor busy all the time. It now uses about a third of what it did. Spots and beacons look and blink as before; the beacon's ring pulses a little more slowly.
Mac 2.1.1
- Added: move the panels. Settings › Map › Panels on the map: tick Move the panels, then drag the info box, map keys, strips and badges to where you want them. Put the panels back in their places resets them.
- Fixed: the info box is always on top, with a solid background, so nothing hides its text.
- Added: new home, dxskyview.com. DX SkyView gets its own web site. Updates, licence activation and problem reports now work through dxskyview.com too, so you keep getting updates after the move. Help › DX SkyView web site opens dxskyview.com.
Mac 2.1
- Added: band openings now. The Openings button shows where the bands are open right now, from the PSK Reporter live feed: from your area or the whole world.
- Added: POTA and SOTA. The POTA/SOTA button shows stations on the air from parks and summits. Point at one for its details.
- Added: radio control. Connect your radio through rigctld or flrig in Settings › Radio. A click on a spot tunes the radio, and the coverage map follows your band.
- Added: Heard over the time you choose (15 minutes to 2 hours), and a Reset button to see only who hears you from now on.
- Improved: Settings has new Activity and Radio tabs.
- Improved: each Heard band has its own clear colour, and you can choose which bands to show.
- Improved: rotator beam lines are thicker, with a thickness setting for each rotator.
- Improved: a controller that stops answering is asked less often.
- Fixed: the licence window always has Back to the map.
- Fixed: steadier rotator connections across sleep and wake, and a line in the log every 10 minutes on how the rotators are doing.
Mac 2.0.2
- The toolbar is one line, the same as on Windows and Linux.
Mac 2.0.1
- DXpeditions: a new map layer shows DXpeditions on the air now and coming in the next 30 days, from NG3K's calendar (used with permission). Needed ones are gold.
- DX cluster: two computers at home can now use the same node and callsign at the same time.
- DX cluster: when the cluster is offline, spotted prefixes stop blinking and fade, so you can see at a glance that it is not connected.
- DX cluster status: Settings › Cluster now shows whether DX SkyView is connected to the node, as which callsign, and when the last spots came in, with a Connect now button.
- Update from Club Log: My DXCC can download your QSOs and confirmations straight from Club Log, once or every day. You paste a token from your Club Log settings; no password is needed.
Mac 2.0
- Added: coverage that follows your antenna. In Settings › Station › Antennas by band, choose the rotator that turns a band's antenna, and that band's coverage map uses its real heading and beam width.
- Added: band opening alerts. Choose needed countries or your own list and a chance to alert from, in Settings › Alerts.
- Added: solar flare warnings. An X-ray tile, red shading on the daylight side during a radio blackout, and an alert from R2.
- Added: greyline planner. The info box shows when both ends are on the greyline today.
- Added: NCDXF beacons. See which beacon is on the air now, with the Beacons button on the toolbar. A schedule table (on or off in Settings) shows every beacon, frequency and power step, with a countdown to each one's next turn.
- Added: where am I heard. See who heard you in the last hour, with the Heard button on the toolbar.
- Added: update from LoTW. Bring your LoTW QSOs and confirmations into your log, in Settings › My DXCC.
- Added: amateur satellites. See where they are, their tracks and footprints, and their next passes, with the Satellites button on the toolbar.
- Improved: Settings are regrouped into clear tabs: Station, Map, Cluster, Alerts, My DXCC, Beacons & satellites, Rotators and Data.
Mac 1.5.2
- Improved: a more realistic MUF map. It now uses the current effective sunspot number from KC2G's ionosonde network.
- Improved: alerts for needed countries are now a clear choice in Settings › Alerts: Off, New country (not in your log on any band) or New band (country not in your log on that band). It's separate from what My DXCC shows on the map.
- Improved: alerts keep working with the Cluster button off. The spots are hidden from the map, and DX SkyView keeps reading the cluster in the background while a watched callsign or needed-country alert is set.
Mac 1.5.1
- Fixed: the info box opens only when the pointer is on a country prefix again. To get info and predictions for any spot on the map, turn on Show info and predictions wherever the pointer rests in Settings › Map.
- Fixed: the info box stays narrower. Long lines wrap downwards instead of making the box wide.
Mac 1.5
- Added: Donate for a Licence (PayPal) in the DX SkyView menu, next to Licence.
- Added: a clock colour. Choose it in Settings › Map › Clocks.
- Added: the exact coverage number. With a coverage map on, the info box shows the percentage for that place.
- Added: six new map styles: Terrain, Midnight, Deep teal, Old map (parchment), Arctic and Desert. Choose one in Settings › Map.
Mac 1.4
- Added: an antenna and height for each band, from 160 to 6 m, in Settings › Station. Predictions and the coverage map now take your antenna's real height into account. A low dipole on 40 m no longer looks as strong as a high one.
- Improved: gain now depends on the band and the take-off angle, so short and long distances are treated differently. Your predictions may change from earlier versions; every band starts with your previous antenna at 10 m, so set your real heights.
Mac 1.3.1
- Fixed: the rotator heading now keeps up with the controller. The heading on screen follows the antenna as it turns and stops when the antenna stops.
- Improved: the serial port list names the USB device next to each port, and notices a cable within a couple of seconds of plugging it in.
- Improved: a warning when two rotators use the same port. Each rotator needs its own port; Settings › Rotators tells you if two are set to the same one.
- Improved: Yaesu GS-232 interfaces connect more reliably. DX SkyView keeps asking while the controller starts up, and if a controller answers in a way it can't read, the status line shows what it said.
- Improved: the Settings window can be resized, and it lays its sections out in columns when it is wide, for less scrolling on a big screen.
Mac 1.3
- Added: antenna rotators (premium). DX SkyView shows where your antenna points: the beam from your QTH with its width, and the heading in the toolbar. Right-click a country or any place on the map and choose Turn … to … (short path) or (long path), and the rotator turns there. Stop in the toolbar stops it.
- The covered area is shaded in the rotator's colour, strongest near your QTH and fading with distance, so you can see at a glance which countries are in the beam.
- Soft start and stop for Yaesu rotators with speed control: the antenna starts slowly, speeds up, and slows down before it stops.
- Works with Yaesu rotators through a GS-232A or GS-232B interface (for example ERC, ERC-DUO, K3NG), Prosistel controllers, and Hamlib rotctld for most other rotators. You can add more than one rotator.
Mac 1.2
- Added: map size options (Settings › Map). Fill the window keeps the true shape of the map and fills the whole window with no black bars; drag to see the parts that are cut off. Whole map and Stretch are also available.
- Added: Outline map style. A dark grey map with only coastlines and borders, the clearest choice under the MUF map.
- Added: border colour and strength, and Draw borders over the MUF map, so the continents stay visible when the MUF map is on.
- Added: your own MUF colours for each MUF level, with Reset MUF colours.
- Added: font, size and colour for the lat/long numbers (Settings › Labels).
- Improved: every installed font can now be chosen for the clocks, prefixes, zone numbers and lat/long numbers.
- Added: a welcome window on the first start that asks for your callsign and locator, so the DX cluster can log in.
- Improved: a ready-to-use map on a new installation: Classic blue, with prefixes, CQ zones, day/night, aurora and the DX cluster on. Your own settings are kept when you update.
- Improved: your licence stays active once it is activated on this Mac.
Mac 1.1.1
- Added: Intel Macs. DX SkyView now runs on both Apple Silicon and Intel Macs with macOS 14 Sonoma or later.
Mac 1.1
- Added: Help › Report a Problem… Describe what happened, add your email if you'd like a reply, and send it. The app's log can be included to help find the cause.
- Added: a log file and Help › Open Log Folder.
- Improved: enter your licence key at any time, also during the trial: click the trial badge or Enter licence key… in the toolbar.
- Improved: install steps for macOS 15 Sequoia (System Settings › Privacy & Security › Open Anyway).
Mac 1.0
- Added: try everything free for 30 days. After the trial, the free version keeps running with the world map, greyline, aurora, the MUF map, space weather and the DX cluster.
- Added: licence keys for the premium features: propagation predictions, your own station, My DXCC and watched callsigns with alerts. Enter the key in DX SkyView › Licence…. One key can be active on 2 computers.
- Added: automatic updates. When a new version is ready, click Update now.
Mac 0.10.1
- Long path included. The prediction wheel and the coverage layer now take the better of the short path and the long path for each place. Long-path openings, such as Europe to VK and ZL on 20 m in the morning, now show up. The coverage layer takes about twice as long to calculate.
Mac 0.10.0
- ITU-R P.533 predictions. The prediction wheel and the coverage layer now use the international standard method for HF prediction, running the ITU's own reference software (ITURHFProp) inside the app.
- Monthly data download. The first prediction each month downloads that month's ionosphere map (about 11 MB) from the ITU repository. It takes a few seconds, once.
- Coverage in the background. The coverage layer is calculated across all of the Mac's processor cores, usually in a few seconds, and is recalculated each UTC hour.
- Choose the model. Settings › Station › Prediction model lets you switch back to the quick built-in model.
- More realistic antenna gains. The presets now give the gain at a low take-off angle, for example 3 dBi for a dipole.
Mac 0.9.1
- More realistic predictions. The model now includes:
- noise from thunderstorms around the world (atmospheric noise), which is strong at night and on the low bands
- absorption counted where the signal actually passes the D layer, with a small amount left at night
- auroral absorption on paths through the auroral zone, using the current Kp
- a fixed extra loss for real-world imperfections
- longer nights with a lower F layer in winter
- SSB now needs a slightly better signal to count as workable. With 100 W and a dipole, 40 m to the USA at night is now a possible contact on SSB, not a near-certain one. CW and FT8 still score much higher, as they do on the air.
Mac 0.9.0
- 24-hour prediction wheel: point at a country to see, for every band and every UTC hour today, the chance that a contact from your station works. Hours run around the wheel with 00 UTC at the top. Bands are rings, 10 m outside and 160 m inside. The current hour is outlined, and the centre shows the best band now.
- Coverage layer: the toolbar's Coverage menu shades the map with where your station should reach right now on the band you choose.
- Your station: set power, antenna, mode and the noise level at your QTH in Settings › Station. Both features use these settings.
Mac 0.8.2
- This help, under Help › DX SkyView Help (Cmd-?). The same file, HELP.md, comes with each release.
Mac 0.8 and 0.8.1
- MUF contours: labelled contour lines at the band edges (3.5, 5, 7, 10, 14, 18, 21, 24.9, 28, 35 MHz), with one flat colour per band range.
- MUF everywhere: a day/night model fills the gaps between ionosondes, so the contours close. Near an ionosonde the map shows its own reading.
- MUF stays readable at night: the MUF colours are drawn above the night shading, so they look the same by day and by night.
- Path MUF in the hover box: the lowest MUF at the reflection points along the short path from your QTH.
- Stronger aurora: the aurora intensity setting goes up to 250%.
# Manual
One section for each feature, always in the same order: What it shows, Turn it on, How to use it, Settings and Good to know. Features marked *Premium* need the 30-day trial or a licence key.
Linux
Linux 2.5.0
New
- Alerts on your phone: a watched callsign, a needed country or a DXpedition on the cluster can now also reach your phone within seconds, through the free ntfy app or Telegram. Settings › Alerts › Also on my phone. DX SkyView at home sends it; no account and no extra cost.
- The radio connects by itself: in Settings › Radio tick Use radio control, and DX SkyView finds the program that has your radio (N1MM Logger+, DXLog, N3FJP, DXLab Commander, Ham Radio Deluxe, OmniRig, flrig, rigctld) or the radio itself on its USB cable, with model, port and speed. Nothing to choose and no port numbers to remember. One status line says what it is connected to, and it names the one line to enter in WSJT-X and the other programs it sees running. The button Find my set-up looks again; the choices by hand are folded away under "Set it up by hand".
- More programs: DX SkyView now reads the frequency and tunes through DXLab Commander, Ham Radio Deluxe and OmniRig (Windows; the radio sharing used by Log4OM, Swisslog and many others).
- N3FJP, WSJT-X and the map together: while DX SkyView has the radio, it keeps N3FJP's frequency and mode up to date, and a DX spot clicked in N3FJP tunes the radio. N3FJP needs no radio connection of its own.
- Help: a "Which set-up is mine?" table for every supported program.
- DX cluster spots in band colours: each spotted country blinks in the colour of its band, the same colours as Heard and Digital, with a key on the map. A country spotted on several bands shows one stripe per band. Countries you need keep a gold ring, watched callsigns a green one. One colour as before: Settings › Map › Cluster spot colours.
- Two radios in N1MM Logger+ or DXLog (SO2R): the map shows both radios and marks the one in focus, with nothing to set. A click on a spot tunes the radio that is already on that band, and the spot list says which radio each spot goes to.
- Several radios on their own cables: DX SkyView lists the radios it finds and you pick one. It never guesses.
- Using the radio through DX SkyView: under the status line, a list of the programs that share the radio (WSJT-X, N3FJP and others), each with its state.
- When the radio stops answering, DX SkyView looks by itself for a running logger or radio program and connects through it, so switching between your logger and the direct connection needs no settings.
- Digital: a Show choice in the Digital box on the map: Everything, Only my radio, or Without my radio. One click instead of three ticks in Settings.
- A key of the marks: the Digital box now explains every mark on the map (dot, the two kinds of diamonds, lines, gold ring, the near-you circle). DX cluster and Satellites have a key too. A key is on the map while its button is on.
Improved
- DX SkyView never keys the radio. It opens the radio's port itself and holds the RTS and DTR lines off, so a radio that transmits on those lines (for example a Kenwood TS-590SG set up for digital modes over USB) is not keyed. While N1MM Logger+ or DXLog is running, DX SkyView opens no radio port at all and connects through the logger.
- The menu bar at the top of the window is always visible (no Alt key), and its Help menu is now called Support: Licence, Report a problem, Check for updates, Open log folder, About. The Help button on the map is the manual.
- The connection to the radio rides out short gaps instead of dropping.
- When a logger does not move the radio after a click on a spot, DX SkyView says so.
- A Copy button for the address that WSJT-X and your logger use to share the radio.
Linux 2.4.0
New
- Radio control without extra programs: DX SkyView now has Hamlib built in. Choose your radio model, its USB or serial port and speed in Settings › Radio, and it connects to the radio by itself (more than 300 radios, e.g. Yaesu FTDX101D, Kenwood TS-590SG).
- Logger link: when N1MM Logger+, DXLog or N3FJP has the radio, DX SkyView reads the frequency from the logger, and a click on a spot tunes the radio through the logger. No cable, no flrig. Works on the same computer or over your home network.
- Follow the radio: besides the coverage map and the beacon band, the cluster spots and Digital can now show only the band the radio is on (each with its own switch in Settings › Radio).
- My own radio (WSJT-X): the stations WSJT-X decodes on your radio appear on the map as diamonds with a line from your QTH, with the signal report and distance, and a "My radio" column in the Digital key. See at a glance what you really hear. One tick, no setup in WSJT-X, also next to JTAlert, GridTracker or a logger. Settings › Activity › Digital.
- Radio, logger and WSJT-X together: with the built-in connection, DX SkyView shares the radio with WSJT-X and your logger on the standard Hamlib address 127.0.0.1:4532. Settings › Radio shows what to enter in each program.
- Digital: "Lines from the last" (2, 3, 5 or 15 minutes, default 5) keeps the who-decodes-whom lines fresh.
Improved
- Settings › Radio is grouped by how you connect: built in, through your logger, or through rigctld/flrig.
- rigctld and flrig addresses now default to 127.0.0.1 instead of localhost, which some Windows PCs could not reach.
Linux 2.3.0
New
- Digital: a new button for FT8, FT4 and the other digital modes, live from PSK Reporter. See who is on the air now on every band, what the stations near you decode (stations, countries, the farthest one, per band), and lines showing who decodes whom around you or any place you pick.
- Stations from countries you still need are marked with a gold ring, with an alert when one is decoded near you (Premium).
Linux 2.2.0
New
- After a crash, DX SkyView asks once whether to send its log to the team. Nothing is sent without your yes.
- Rotator dial: a small compass for each rotator on the map, in the antenna's colour. Click on it to turn the antenna, with − and + (5°) and Stop. Move it with Move the panels; switch it off in Settings › Rotators.
- Change callsign in the licence window, for when you need a key for another callsign.
Improved
- Many more DX cluster nodes to choose from, grouped by region (all checked to be working).
- A node you type in yourself is remembered: once it has connected, it appears under "My nodes" at the top of the list (the last five).
- Where am I heard is live: your PSK Reporter and Reverse Beacon reports appear within seconds instead of every 5 minutes.
- The DX cluster keeps one steady connection to your node and never logs in without your callsign. If your node sends no spots, DX SkyView says so and shows spots from another node meanwhile.
- The toolbar stays on one row: buttons that don't fit go into a More menu.
- Sunrise and sunset in the clock font, easier to read.
- Shorter Settings tab name (Beacons & more).
Fixed
- The X-ray reading no longer drops out when NOAA's file is being updated; DX SkyView tries again a minute later.
- DX SkyView now uses only dxskyview.com for updates, licences and problem reports.
Linux 2.1.2
Fixed
- The map redraws much faster when new spots or space weather come in. DX SkyView now uses less of the processor, mostly on big screens and with the graphics card switched off.
- Band openings now no longer slows the map down while you move the mouse.
- The MUF map no longer makes the window pause for a moment when it is worked out again.
- A rotator that was asked to stop keeps its Stop command when DX SkyView closes or the computer goes to sleep right after.
- The map no longer shows an antenna as turning when its controller is not connected.
- Problem reports from Linux are now marked as Linux.
- If the map page keeps crashing, DX SkyView stops reloading it after three tries instead of trying for ever.
Linux 2.1.1
New
- Move the panels: put the info box, the map keys and the strips anywhere on the map. Settings › Map › Panels on the map.
- New home, dxskyview.com: DX SkyView gets its own web site. Updates, licence activation and problem reports now work through dxskyview.com too, so you keep getting updates after the move. Help › DX SkyView web site opens dxskyview.com.
Fixed
- The info box is always on top, so other panels no longer hide part of it.
Linux 2.1
New
- Radio control (CAT): DX SkyView shows your radio's frequency on the map and tunes the radio when you click a spot, a park or a summit, and can turn the antenna too. The map follows the radio's band. Works with Hamlib rigctld and flrig. Settings › Radio.
- Band openings now: the new Openings button shows where each band is open right now, from the live reports of all stations on PSK Reporter: from your area, or a sample of the whole world.
- POTA and SOTA: the new POTA/SOTA button shows activators on the air in parks and on summits, with frequency and mode.
- Heard: choose which bands to show (click the band chips under the map), show the last 15 minutes, 30 minutes, 1 hour or 2 hours, and Reset to show only new reports. Band colours are easier to tell apart.
- Rotators: the beam line is thicker, with a dark outline, and its thickness can be set for each rotator.
- Settings › Activity: Heard, Openings and POTA/SOTA settings in one place.
Fixed
- After deactivating the licence there was no way back to the map. The licence page now always has a Back to the map button (and View › Back to the map, Ctrl+M).
- The toolbar no longer hides buttons such as Heard or Coverage on narrower screens: they move to a second row instead.
- Fewer "X-ray not available" gaps: a cut-off answer from NOAA is fetched again, and the last good data stays on screen.
- Steadier rotator connections across sleep and wake, and a note in the log if the computer stopped unexpectedly.
Linux 2.0.1
- DXpeditions: a new map layer shows DXpeditions on the air now and coming in the next 30 days, from NG3K's calendar (used with permission). Needed ones are gold.
- Big screens and TVs: much lower CPU/GPU use, and the toolbar stays on one line.
- DX cluster: two computers at home can now use the same node and callsign at the same time.
- DX cluster: when the cluster is offline, spotted prefixes stop blinking and fade, so you can see at a glance that it is not connected.
- DX cluster status: Settings › Cluster now shows whether DX SkyView is connected to the node, as which callsign, and when the last spots came in, with a Connect now button.
- Update from Club Log: My DXCC can download your QSOs and confirmations straight from Club Log, once or every day. You paste a token from your Club Log settings; no password is needed.
Linux 2.0
New
- Settings, regrouped: Station, Map, Cluster, Alerts, My DXCC, Beacons & satellites, Rotators and Data. Each tab says what it's for, and premium settings are marked.
- Alerts tab: every alert in one place, with the sound and notification choices at the top.
- Band opening alerts: DX SkyView tells you when a band opens to a country you need or choose, now or in the next two hours, above the chance you set.
- Coverage that follows your antenna: in Station › Antennas by band, pick the rotator that turns each antenna. The coverage map then uses the antenna's real heading and beam, and updates when you turn it.
- NCDXF beacons: the Beacons button shows the 18 beacons, marks the one on the air now on your chosen band with a line from your QTH, and lists who is on each band right now. A schedule table (on or off in Settings) shows every beacon, frequency and power step, with a countdown to each one's next turn.
- Satellites: the Satellites button shows the ISS and the popular FM and linear satellites, with their tracks and footprints. Point at one for its next passes over your QTH and its frequencies. An alert 5 minutes before a good pass is in Alerts.
- X-ray and radio blackouts: a new X-ray tile shows the solar flare level. During a blackout (R1 or more), the daylight side is shaded red, and R2 or more gives an alert.
- Greyline planner: the info box shows today's times when the greyline crosses both you and the other station.
- Where am I heard: the Heard button shows the stations that received your callsign in the last hour, from PSK Reporter and the Reverse Beacon Network, coloured by band.
- Update from LoTW: My DXCC can download your QSOs and confirmations straight from ARRL LoTW, once or every day.
- MUF map: more accurate, using the effective sunspot number fitted to today's ionosonde readings.
Fixed
- The DX cluster shows its spots sooner after the app starts.
- Alerts for watched callsigns and needed countries work with the Cluster button off.
Linux 1.9.2
Fixed
- Alerts for watched callsigns and needed countries work again with the DX cluster layer turned off. The spots stay hidden from the map, but the app keeps listening and alerts you.
New
- Settings › Cluster › Alerts: choose which needed countries alert you. "New country" means a country that isn't in your log on any band. "New band" means a country that isn't in your log on that band. Needed-country alerts use your log from My DXCC.
- Turning the Cluster button off while alerts are set shows a short note that the alerts stay on.
- The MUF map is more accurate and no longer runs too high: it uses KC2G's effective sunspot number, fitted to today's ionosonde readings, instead of the daily sunspot count.
Linux 1.9.1
Fixed
- The info box opens only when the pointer is on a country prefix again. To get info and predictions for any spot on the map, turn on Settings › Look › "Show info and predictions wherever the pointer rests".
- The info box stays narrower: long lines wrap downwards instead of making the box wide.
Linux 1.9
New
- Point anywhere on the map, not only at a country label: the info box and the prediction wheel show that 2° square, for example the New York area instead of the middle of the USA.
- With coverage on, the info box shows the exact coverage figure for that place.
- Six new map styles: Terrain, Midnight, Deep teal, Old map (parchment), Arctic and Desert.
- Clock colour: choose it in Settings › Clocks.
- Help › Donate for a licence (PayPal) opens the donation page. The Licence page has the same link.
Linux 1.8
New
- Antennas by band. In Settings › Station, choose the antenna and its height above ground for each band from 160 to 6 m. Predictions and coverage now use the real gain of that antenna at each take-off angle, so a low dipole and a high Yagi give different results, on short and long paths.
Fixed
- The serial port list in Settings › Rotators updates by itself when you plug in a cable.
- Each rotator remembers its USB cable by name, so it keeps working when the cables are plugged in in a different order.
- If Linux doesn't allow DX SkyView to use a serial port, the rotator box now tells you how to fix it.
Linux 1.7.1
New
- The Settings panel can be made wider: drag its left edge, or click ⤢. On a wide screen the settings are shown in several columns, so there is less scrolling.
- Settings › Rotators warns you when two rotators are set to the same serial port.
Fixed
- The serial port list shows only real devices (USB adapters), with the maker and serial number, instead of every built-in port.
- The rotator settings refresh when you change a port.
Linux 1.7
New
- Antenna rotators (premium). Connect your rotator controller by USB and add it in Settings › Rotators. DX SkyView supports Yaesu GS-232A and GS-232B controllers and interfaces (including ERC and K3NG), Prosistel D and F controllers, and Hamlib rotctld over the network. Up to 4 rotators.
- Each antenna's beam is drawn on the map from your QTH in its own colour: the heading with arrows, the covered area shaded between the beam-width edges and, if you like, the long path. The antenna's name is shown on the beam.
- Soft start and stop for Yaesu (GS-232) controllers: the rotator starts slowly, speeds up, and slows down again before the target and when you press Stop.
- Right-click a country, a spot or any place on the map and choose the antenna (listed by its name and colour) and the short or long path, or Stop all rotators. The antenna turns, and the map follows it.
- A box at the top right shows each antenna's heading. Type a heading and press Enter to turn, or click Stop.
Linux 1.6
New
- The map now fills the window, with no black bars at the sides. Drag the map to see the edges. Settings › Map › Map size also offers Whole map and Stretch.
- New map style Outline (borders only): just coastlines and borders on grey, ideal under the MUF map.
- Coastline and border colour and strength, and Draw borders over the MUF map, so the world stays visible under the MUF colours.
- Choose the colour of each MUF level (3.5 to 35 MHz).
- Choose the font, size and colour of the latitude and longitude numbers.
- The font lists show every font installed on your computer.
- A welcome window on first start asks for your callsign and locator, so the DX cluster can log in with your call.
- New installations start with the classic blue map, prefixes, CQ zones, day/night, aurora and the DX cluster on.
Changed
- The solar wind tile was removed from the space weather panel.
Linux 1.5.1
Fixed
- DX SkyView did not start on Ubuntu 23.10 and later (including 24.04). Both the .deb and the AppImage now start normally.
The first Linux version (1.5)
- DX SkyView for Linux, as an AppImage and a .deb, with the same features as Windows and Mac: live world map, greyline, aurora, MUF map, DX cluster with your own login, My DXCC, watched callsigns and alerts, ITU-R P.533 predictions, and all the look settings.
- It updates itself: click Update now when a new version is offered.
# Manual
One section for each feature, always in the same order: What it shows, Turn it on, How to use it, Settings and Good to know. Features marked *Premium* need the 30-day trial or a licence key.
Online map
Online map 2.5.0
- New: DX cluster spots in band colours. Each spotted country blinks in the colour of its band, the same colours as Heard and Digital, with a key on the map. A country spotted on several bands shows one stripe per band. One colour as before: Settings › Map › Cluster spot colours.
- New: a key of the marks. The Digital box explains every mark on the map; DX cluster and Satellites have a key too. A key is on the map while its button is on.
- Improved: Digital lines stay within the time you choose under "Lines from the last".
Online map 2.3.0
- New: Digital. A new button for FT8, FT4 and the other digital modes, live from PSK Reporter. See who is on the air now on every band, what the stations near our example station in Cyprus decode (stations, countries, the farthest one, per band), and lines showing who decodes whom around it or any place you pick.
- In the desktop apps: the same for your own station, and stations from countries you still need marked with a gold ring, with an alert when one is decoded near you (Premium).
Online map 2.2.0
- New: a real phone layout. The map fills the screen, space weather and clocks sit in a bar at the bottom, and a tapped country's info opens as a card.
- Improved: the toolbar stays on one row: buttons that don't fit go into a More menu.
- Improved: many more DX cluster nodes to choose from, grouped by region (all checked to be working).
- Improved: sunrise and sunset in the clock font, easier to read.
- Improved: shorter Settings tab name (Beacons & more).
- Fixed: the X-ray reading no longer drops out when NOAA's file is being updated.
Online map 2.0.2
- DX cluster status: the status line now reads plainly when the spots come from the DX cluster network through HamQTH.
Online map 2.0.1
- DXpeditions: a new map layer shows DXpeditions on the air now and coming in the next 30 days, from NG3K's calendar (used with permission).
- Big screens and TVs: much lower CPU/GPU use, and the toolbar stays on one line.
- DX cluster: when the cluster is offline, spotted prefixes stop blinking and fade, so you can see at a glance that it is not connected.
- DX cluster status: Settings › Cluster now shows whether DX SkyView is connected to the node and when the last spots came in, with a Connect now button.
Online map 2.1.1
- Changed: predictions, your own station and Where am I heard are now in the desktop app only. The online map is the free version and shows everything from our example station in Cyprus. The desktop app is free to try for 30 days.
- Improved: the map redraws much faster when new data comes in, and Band openings no longer slows it down.
- Improved: phones. Countries are easier to tap.
- Changed: a tab you are not looking at stops loading data and catches up when you come back.
- Improved: the MUF map no longer makes the page pause for a moment when it is worked out again.
- Changed: the online map says "example station" where it shows something from the station in Cyprus (bearings, the Sun, the MUF tile).
- Added: move the panels. Settings › Map › Panels on the map: put the info box, map keys, strips and badges where you want them.
- Fixed: the info box is always on top, so nothing hides its text.
- Fixed: the DX cluster connects again. Settings › Cluster lets you choose the node, and another one is tried by itself when one doesn't answer.
Online map 2.1
- Added: band openings now. The Openings button shows where each band is open right now, from the live PSK Reporter feed: from your area, or a sample of the whole world.
- Added: POTA and SOTA. The POTA/SOTA button shows activators on the air in parks and on summits.
- Improved: Heard. Choose the bands, show 15 minutes up to 2 hours, and Reset to see only new reports. Clearer band colours.
- Improved: Settings › Activity for Heard, Openings and POTA/SOTA.
- Fixed: fewer gaps in the X-ray tile.
Online map 2.0
- Added: where am I heard. With your callsign entered, the Heard button shows who heard you in the last hour.
- Added: amateur satellites. Where they are, their tracks and footprints, and their next passes over you.
- Added: NCDXF beacons. See which beacon is on the air now, with a schedule table you can move around the map.
- Added: solar flare warnings. An X-ray tile, and red shading on the daylight side during a radio blackout.
- Added: greyline planner. The info box shows when both ends are on the greyline today.
- Added: a manual, with a section for each feature, in Help and on the DXSkyView page.
- Improved: the toolbar buttons plainly show on or off, and resting the pointer on one explains it.
- Improved: more settings, including fonts, colours, clocks and refresh times, grouped into clear tabs.
Online map 1.3.2
- Improved: the My DXCC and Cluster tabs now point to the free download of the desktop app.
- Improved: a more realistic MUF map. It now uses the current effective sunspot number from KC2G's ionosonde network.
Online map 1.3.1
- Fixed: the info box opens only when the pointer is on a country prefix again. To get info and predictions for any spot on the map, turn on Show info and predictions wherever the pointer rests in Settings › Map.
- Fixed: the info box stays narrower. Long lines wrap downwards instead of making the box wide.
Online map 1.3
- Added: seven new map styles: Outline, Terrain, Midnight, Deep teal, Old map (parchment), Arctic and Desert. Choose one in Settings › Map.
- Added: predictions at any place, and the exact coverage number in the info box with a coverage map on.
- Added: a link back to the DX Holiday home page at the top left.
- Added: a short note on what we count. To improve DX SkyView we count visits and which features are used, with the visitor's country. We use no cookies and don't store IP addresses.
Online map 1.2
- Added: an antenna and height for each band, from 160 to 6 m, in Settings › Station. Predictions and the coverage map now take your antenna's real height into account, so your predictions may change. Every band starts with your previous antenna at 10 m.
- Added: a welcome dialog on your first visit that asks for your callsign and locator.
- Improved: new visitors start with the Classic blue map, with prefixes, greyline, aurora, CQ zones and the DX cluster on.
Online map 1.1
- Added: the version number at the bottom of the Help window.
- Improved: data feeds. Problems with a data provider are now noticed and fixed faster.
The first online version (1.0)
- Live world map with the greyline, CQ and ITU zones and all DXCC prefixes, in your web browser on a computer, tablet or phone.
- MUF map from live ionosonde readings, with contour lines at the band edges.
- DX cluster spots that blink on the map; point at a country for frequencies, modes and calls.
- Propagation predictions: a 24-hour band wheel to any country and a coverage map for any band, calculated with ITU-R P.533 for your power, antenna and mode.
- Space weather: Kp, solar flux, the A index, sunspots and the aurora forecast at a glance.
- Your settings (callsign, locator, station) are kept in your browser only.