Contents: The screen at a glance · Moving the panels · Using DX SkyView on a phone (online map) · Getting started · Moving around the map · Info box and prediction wheel · Coverage map · Coverage that follows your antenna · Greyline and greyline planner · Aurora · MUF map · DX cluster · Alerts · Alerts on your phone · Band opening alerts · My DXCC: your log · Update from LoTW · Update from Club Log · NCDXF beacons · Satellites · DXpeditions · Where am I heard · Band openings now · Digital: FT8, FT4 and more · POTA and SOTA activations · Space weather and X-ray · Antennas by band · Antenna rotators · Rotator dial · Radio control (CAT) · Licence and free version · Where the data comes from · Privacy · Troubleshooting
One section for each feature, always in the same order: What it shows, Turn it on, How to use it, Settings and Good to know. Features marked Premium need the 30-day trial or a licence key.
Online map: Features marked Desktop app are only in the Windows, Mac and Linux apps (free download from dxskyview.com/download).
Online map: The online map is the free version. It shows everything from our example station in Cyprus. Features marked Premium (predictions, your own station, Where am I heard) are in the desktop app, where every feature is free to try for 30 days.
The screen at a glance
Toolbar buttons (click to turn on or off). A button that is on has a lit green dot and a green frame; one that is off has a hollow grey dot. Rest the pointer on any button for a short note on what it does and whether it is on.
| Button | What it shows | Its settings |
|---|---|---|
| Prefixes | DXCC prefix labels; point at one for the info box | Settings › Map › Prefix labels |
| Greyline | Day, night and the twilight band | Settings › Map › Style and size |
| Aurora | NOAA aurora forecast | Settings › Map › Style and size |
| MUF | Maximum usable frequency map with contours | Settings › Map › MUF map |
| CQ / ITU | CQ and ITU zones | Settings › Map › Zone labels and lines |
| Grid | Latitude and longitude lines | Settings › Map › Lat/long numbers |
| DX cluster | Spotted countries blink on the map | Settings › Cluster |
| Beacons | The 18 NCDXF beacons, which one is on the air | Settings › Beacons & more |
| Satellites | Amateur satellites, tracks and footprints | Settings › Beacons & more |
| DXpeditions | DXpeditions on the air now or starting within 30 days | Settings › Beacons & more |
| Heard | Stations that heard your callsign (last 15 minutes to 2 hours) | Settings › Activity |
| Openings | Where each band is open right now, from everybody's reports | Settings › Activity |
| Digital | FT8 and FT4 stations on the air now, what is decoded near you per band, who decodes whom | Settings › Activity |
| POTA/SOTA | Activators on the air now in parks and on summits | Settings › Activity |
| Coverage (menu) | Where your signal should reach on one band this hour | Settings › Station |
Toolbar too narrow? On a small window the buttons get a little tighter, and if they still don't fit, the layer buttons move to a second row. No button is ever hidden.
Around the map: the info box and prediction wheel appear at the top left when you point at a prefix. Legends sit at the bottom. The strips at the top show beacons on air and watched callsigns. The panel below the map has space weather, the clocks and the Sun at your QTH.
Settings tabs: Station (who and where you are, power, antennas) · Map (how it looks) · Cluster (where spots come from) · Alerts (every alert) · My DXCC (your log) · Beacons & more · Activity (Heard, Openings, Digital, POTA/SOTA) · Radio (radio control) · Rotators · Data (refresh and sources).
Moving the panels
What it does: puts the info box, the map keys, the strips at the top (watched callsigns, beacon, rotators, radio) and the cluster and zoom badges where you want them on the map.
How to use it: Settings › Map › Panels on the map: tick Move the panels. Each panel gets a dashed green frame (the info box shows an example). Drag a panel to its new place. Untick Move the panels when you are done. DX SkyView remembers the places, also after a restart.
Put them back: Settings › Map › Put the panels back in their places.
Good to know: the info box always stays on top of the other panels, so nothing hides it. On a phone the panels have fixed places.
Using DX SkyView on a phone (online map)
What it does: on a phone the online map fills the screen and everything else gets out of the way. It also works with the phone held sideways.
How to use it:
- Map layers: the buttons under the top bar. Swipe the row sideways to see them all. A green dot means the layer is on.
- Settings and Help: the ⚙ and ? buttons at the top right. They open full screen; × closes them.
- Moving and zooming: drag the map with one finger, and pinch with two fingers to zoom. Whole world at the bottom left zooms back out.
- A country's info: tap its prefix or spot. The info and the prediction wheel open at the bottom; scroll them with your finger, and close them with ×.
- Space weather and clocks: the bar at the bottom shows Kp, solar flux, the MUF at your QTH and UTC. Tap it to open the space weather panel and the clocks; tap it again to close.
Good to know: on a phone fewer prefixes are shown at once so they don't overlap; more appear as you zoom in. Panels can only be moved on a computer or tablet.
Getting started
- Open Settings › Station. Enter your callsign and locator (for example KM64) and click Use locator. You can also type latitude and longitude.
- Set your power, mode, the noise at your QTH and the antenna on each band. Predictions use these.
- Turn layers on and off with the toolbar buttons. Your choices are remembered.
- Desktop apps: To know which countries you still need, import your log in Settings › My DXCC (ADIF file, LoTW or Club Log).
Moving around the map
- Zoom: mouse wheel (around the pointer), the + and − buttons, a double-click, or a pinch on a touchpad. The keys + and − also work.
- Move: drag the map.
- Whole world: press 0, or click "Whole world" on the zoom badge.
- Windows: Menu bar (top of the window): File, View and Support. View › Full screen (F11), Larger or Smaller text (Ctrl + and Ctrl −), Reload (Ctrl R).
- Linux: Menu bar (top of the window): File, View and Support. View › Full screen (F11), Larger or Smaller text (Ctrl + and Ctrl −), Reload (Ctrl R).
Info box and prediction wheel
Online map: The prediction wheel is in the desktop app (Premium). The online map's info box shows everything else.
What it shows: for the country under the pointer: its CQ and ITU zones and grid square, sunrise and sunset, the short and long path bearing and distance from your QTH (with a dashed line on the map), aurora chance, MUF there and on the path, today's greyline times at both ends, and its cluster spots. For countries more than 300 km away, the 24-hour prediction wheel appears next to it. (Premium)
Turn it on: point at a prefix label (Prefixes on), or at a spotted country.
How to read the wheel: hours run round the wheel with 00 UTC at the top. Bands are rings, 10 m outside and 160 m inside. Colour is the chance of a contact, blue (10%) to red (100%). The current hour is outlined; the centre shows the best band now.
Settings: Settings › Map › Info box: Show info and predictions wherever the pointer rests (not only on prefixes), and Show the 24-hour prediction wheel. Settings › Station › Prediction model: ITU-R P.533 (recommended) or the quick model.
Good to know: predictions are probabilities for this month, not guarantees. Compare them with the MUF map, the cluster and Heard.
Coverage map (Premium)
What it shows: the map shaded with the chance of reaching each place from your station on one band, this hour.
Turn it on: choose a band in the toolbar's Coverage menu. Choose Off to remove it.
How to use it: red and orange areas are your best chances right now. The legend shows the band, mode and model.
Settings: Settings › Station (power, mode, noise, antennas by band). With rotators set up, the Turned by column links an antenna to its rotator, and the map then follows the antenna (next section).
Good to know: the first ITU prediction each month downloads the ITU ionosphere data (about 11 MB) once.
Coverage that follows your antenna (Premium, desktop app with rotators)
What it shows: the coverage map with your beam's real heading: strong in front, weaker to the sides, very little behind.
Turn it on: in Settings › Station › Antennas by band, pick the rotator under Turned by for that band, then choose the band in Coverage.
How to use it: turn the antenna; once it has stayed put for 3 seconds, the map updates. The legend says "following antenna at *heading*°".
Settings: the beam width is set for each rotator in Settings › Rotators.
Good to know: this works for Yagi and quad antennas. Dipoles, inverted Vs and verticals count the same in every direction.
Greyline and greyline planner
What it shows: night is darker, and the twilight band (greyline) glows. Low bands often open along it.
Turn it on: the Greyline button. The planner line is in the info box for any country more than 300 km away.
How to use it: the info box shows "Greyline both ends today: …" with the UTC times when both you and the other station have the Sun between 6° below and 2° above the horizon. If there is no such time, it shows your greyline and theirs.
Settings: Settings › Map › Night darkness and Greyline glow.
Aurora
What it shows: NOAA's OVATION forecast of the chance of aurora. Paths through it are weak and fluttery.
Turn it on: the Aurora button.
Settings: Settings › Map › Aurora intensity.
MUF map
What it shows: the highest usable frequency for a 3000 km hop, from live ionosondes (the dots) plus a model. Labelled lines mark the band edges: inside the 14 line 20 m is open, inside 21 15 m is open, and so on.
Turn it on: the MUF button.
How to use it: a path is limited by its lowest point; the info box works out the path MUF for you.
Settings: Settings › Map › MUF map (shading, contour lines, flat band colours, colours per level, borders over the MUF map). Settings › Data › MUF source.
DX cluster
What it shows: spotted countries blink on the map, each in the colour of its band (the same colours as Heard and Digital). A country spotted on several bands has one stripe per band, newest first. The key on the map lists the bands that have spots now. Countries you need get a gold ring and blink fast, watched callsigns a green ring. With two radios in N1MM Logger+ or DXLog, the colour tells you at a glance which radio a spot is for, and the list that opens on a click says "→ radio 1" or "→ radio 2" beside each spot. One colour for all spots instead: Settings › Map › Cluster spot colours, untick Colour the spots by band. Point at one for frequency, mode, call, age and comment. The badge at the bottom shows the node, spots and countries.
Turn it on: the DX cluster button. Spots refresh every minute.
The key: while the DX cluster button is on, a small key on the map shows the colours: a spotted country, a country you still need (Premium, with your log) and a callsign you watch.
Settings: Settings › Cluster: the node (list or your own host:port), login commands, modes, bands, how long a spot stays, all countries or only needed ones, and watched callsigns (Premium). The cluster logs in with your callsign from Settings › Station.
Windows: My nodes: choose "Other…" and type host:port to use a node that is not in the list. Once it has connected, DX SkyView keeps it under "My nodes" at the top of the list (the last five you used).
Connection: DX SkyView keeps one steady connection to your node and never logs in without your callsign. Without a callsign the spots come from HamQTH until you enter one in Settings › Station. If your node sends no spots, the status line says so and the spots come from another node while DX SkyView keeps trying yours.
Linux: Connection: DX SkyView keeps one steady connection to your node and never logs in without your callsign. Without a callsign the spots come from HamQTH until you enter one in Settings › Station. If your node sends no spots, the status line says so and the spots come from another node while DX SkyView keeps trying yours.
Online map: Node (online map): Settings › Cluster › Node: Automatic (the first that works) or one node from the list. The web site reads that node for you; if it doesn't answer, the next one is tried and the status line says so.
Status: Settings › Cluster now shows whether DX SkyView is connected to the node, as which callsign, and when the last spots came in, with a Connect now button.
Good to know: turning the button off hides the spots but keeps alerts working.
Alerts (Premium, desktop app)
What it does: tells you, with a sound and/or a notification, about watched callsigns, needed countries, band openings, radio blackouts and satellite passes.
Turn it on: Settings › Alerts. Choose How to alert me (sound, notification) and click Test the alert. Then choose what to be alerted about.
Settings: watched callsigns are typed in Settings › Cluster. Needed countries: Off, New country, or New band (uses your log in My DXCC). Band openings: see below. Radio blackouts R2 or more and satellite passes above 20° have their own ticks.
Good to know: alerts work even with the Cluster button off.
Alerts on your phone (Premium, desktop app)
What it does: every alert (watched callsign, needed country, band opening, radio blackout, satellite pass, needed country in Digital) also arrives on your phone within seconds, wherever you are. DX SkyView on your computer sends it, so the program must be running at home.
Turn it on with the ntfy app (simplest): Settings › Alerts › Also on my phone › With the free ntfy app.
- Install the free app ntfy on the phone (App Store or Google Play). No account is needed.
- In DX SkyView press Make a name for me (or type your own private name). Keep it hard to guess: whoever knows the name can read the alerts.
- In the ntfy app press + (Subscribe to topic) and type the same name.
- Press Send a test to my phone.
Turn it on with Telegram: choose With Telegram.
- In Telegram open the chat @BotFather, send
/newbotand answer its two questions. It gives you a long code. - Paste the code into Bot code from BotFather.
- In Telegram open your new bot and send it "hello".
- Press Find my chat, then Send a test to my phone.
Good to know: the same station on the same band comes at most once an hour. Only the alert text (for example "3Y0J 14025.0 CW") passes through the ntfy or Telegram service to reach your phone; nothing else leaves your computer, and nothing is sent while this is Off. On an iPhone, allow notifications for ntfy when it asks.
Band opening alerts (Premium, desktop app)
What it does: alerts you when a band opens to a country you need or choose, now or within the next two hours.
Turn it on: Settings › Alerts › Band openings: Countries I still need, Countries I choose (type the prefixes), or Both. Set Alert when the chance reaches (30–90%).
How to use it: the alert reads like "20 m opening to JA Japan: 70% now". The list under the setting shows the openings right now, best first.
Good to know: it checks every 10 minutes, on the bands you show in the cluster, once per country and band every 6 hours.
My DXCC: your log (Premium, desktop app)
What it does: knows which countries (or band-countries) you have worked and confirmed, so needed spots stand out in gold and alerts know what you need.
Turn it on: Settings › My DXCC › Import ADIF… (export your log from your logging program first), or Update from LoTW / Update from Club Log (next sections).
Settings: Needed means a new country or a new band-country; Count only confirmed QSOs.
Good to know: importing an ADIF file replaces the log. LoTW and Club Log add to it.
Update from LoTW (Premium, desktop app)
What it does: downloads your QSOs and confirmations from ARRL LoTW into My DXCC.
Turn it on: Settings › My DXCC › Update from LoTW. Enter your LoTW username and password and click Connect.
How to use it: the line above the buttons shows where you are: grey Not connected, amber Connecting…, green Connected to LoTW as …, or red when LoTW refused the login or could not be reached. Once it is green, click Update from LoTW. A big log can take a few minutes.
Settings: Remember the password on this computer (encrypted by the system), Update from LoTW once a day, and Forget the LoTW login.
Good to know: your login is only ever sent to lotw.arrl.org. The log keeps one entry per call and band, so its QSO count can be lower than in your logbook.
Update from Club Log (Premium, desktop app)
What it does: downloads your QSOs and confirmations from Club Log into My DXCC, the same way as LoTW.
Turn it on: first make a token on clublog.org: log in, open Settings, the API tab, and create a token. Club Log shows it only once, so copy it straight away. Then in DX SkyView open Settings › My DXCC › Update from Club Log, check the Club Log callsign (your station callsign is filled in), paste the token and click Connect.
How to use it: the line above the buttons shows where you are: grey Not connected, amber Connecting…, green Connected to Club Log as …, or red when Club Log refused the token or the callsign, or could not be reached. Once it is green, click Update from Club Log. A big log can take a few minutes.
Settings: Remember the token on this computer (encrypted by the system), Update from Club Log once a day, and Forget the Club Log token.
Good to know: no password is needed and the token is only ever sent to clublog.org. Club Log deletes a token that is not used for six months; if the line turns red with "did not accept the token", make a new token and paste it. The daily update keeps the token in use. The callsign must be one whose log is on your Club Log account.
NCDXF beacons
What it shows: the 18 NCDXF/IARU beacons as triangles. The one on the air now on your chosen band has a pulsing ring, a line from your QTH and a label like "4X6TU 14.100". The strip at the top shows who is on each band right now.
Turn it on: the Beacons button.
How to use it: tune to the frequency and listen. Each beacon sends for 10 seconds: its call at 100 W, then four 1-second dashes at 100 W, 10 W, 1 W and 0.1 W. The last dash you can hear shows how good the path is. Point at a beacon for its bearing, distance, next times on the band and the predicted chance.
The schedule table: tick Show the beacon schedule table on the map in Settings › Beacons & more. It lists all 18 beacons on 14.100, 18.110, 21.150, 24.930 and 28.200 MHz, marks ON AIR, and counts down (minutes:seconds) to each beacon's next turn. Drag its title bar to move it anywhere on the map (double-click the title bar to put it back), and close it with ×.
Settings: Settings › Beacons & more › Beacon band to follow.
Good to know: the beacons take turns: one full round on all five bands takes 3 minutes.
Satellites
What it shows: the ISS and popular FM and linear satellites as blue dots with their names, their track 45 minutes back (dotted) and ahead, and their footprint: the area where the satellite is above the horizon.
Turn it on: the Satellites button.
The key: while the Satellites button is on, a small key on the map shows the marks: the satellite now, its path ahead, its path behind (dotted) and its footprint.
How to use it: when your QTH is inside a footprint, you can work through that satellite. Point at one for its height, whether it is above your horizon now, the next three passes over your QTH (local time, with the highest elevation) and its frequencies.
Settings: Settings › Beacons & more › Satellites: tick the ones to show, or add one by its NORAD number. (Desktop) Settings › Alerts: alert 5 minutes before a pass higher than 20°.
Good to know: the orbit data comes from CelesTrak and refreshes twice a day.
DXpeditions
What it shows: DXpeditions and other announced DX operations as diamonds at their country. Bright pink with the callsign: on the air now. Faded pink: starting within the next 30 days. Gold: a country you still need (Premium, with your log imported in My DXCC). The legend at the bottom counts them.
Turn it on: the DXpeditions button.
How to use it: point at a diamond for the callsign, country, dates, how many days until it starts, bands, QSL route, bearing and distance from your QTH, and a short note on who operates and which modes. Use the bearing to turn your antenna, and the Info box prediction for the best time to call.
Settings: Settings › Beacons & more shows how many operations were found and when the list was last read.
Good to know: the list comes from NG3K's Announced DX Operations (ADXO, ng3k.com), used with the kind permission of Bill NG3K. It is read at most every 6 hours, so a change announced today can take a few hours to appear. Dates are as announced; operations can start late or end early.
Where am I heard (Premium, desktop app)
What it shows: dots at the stations that received your callsign (from PSK Reporter and the Reverse Beacon Network), coloured by band, with lines from your QTH. A bigger dot is a stronger signal.
Turn it on: enter your callsign in Settings › Station, then click Heard.
How to use it: call CQ or send an FT8 or CW signal, then watch the map. Point at a dot for the band, mode, signal report and how long ago. The key under the map shows how many stations heard you and a coloured chip for each band.
Choose the bands: click a band chip in the key under the map to hide that band; click it again to show it. All bands shows every band again. The same chips are in Settings › Activity. Your choice is remembered.
Reset: click Reset (in the key or in Settings › Activity) to clear the map: from that moment on only new reports are shown, for example after you change antenna or band. Show all again brings the earlier reports back.
Settings: Settings › Activity › Where am I heard: show reports from the last 15 minutes, 30 minutes, 1 hour or 2 hours, the bands to show, and Reset.
Band colours: 160 m purple, 80 m blue, 60 m light blue, 40 m cyan, 30 m white, 20 m green, 17 m lime, 15 m yellow, 12 m orange, 10 m red-orange, 6 m pink-red. Openings uses the same colours.
Good to know: reports arrive live: PSK Reporter's live feed and the Reverse Beacon Network bring new ones within seconds (the map redraws at most every 2 seconds), and every 5 minutes the full list fills in anything missed. Stations without a locator are placed in the middle of their country. While the layer is on, your callsign is sent to these services to ask for your reports; nothing else is sent.
Band openings now
What it shows: where each band is open right now, from the live reception reports of all stations on PSK Reporter (FT8, FT4, WSPR, CW skimmers and more), not only your own. Each dot is coloured by band.
Desktop apps: (Premium)
Online map: The online map shows Whole world. From my area needs your own station, which is in the desktop app.
Turn it on: click Openings on the toolbar.
How to use it: with From my area (the default), you see the stations that heard someone near you, or were heard near you, in the last minutes: the band is open from your area to there. The dashed circle is your area. Point at a dot for the band, how many reports and how long ago. Each band chip in the key also shows the farthest distance in thousands of km (for example 20 9k). Click a chip to hide or show that band.
Whole world shows a 1% sample of all reports in the world, as dots where each path came down (half way). It shows which bands are open where, anywhere on Earth.
Settings: Settings › Activity › Band openings now: From my area or Whole world, the size of your area (300, 600 or 1000 km) and how far back to show (15 minutes, 30 minutes or 1 hour).
Good to know: the first reports come in within a minute or two after you turn it on. Reports are live: nothing is stored, and no callsign or data of yours is sent. Data: PSK Reporter (Philip Gladstone N1DQ), live feed by Tom M0LTE.
Digital: FT8, FT4 and more
What it shows: the digital stations (FT8, FT4 and, if you like, every digital mode) live from PSK Reporter, in three parts:
- On the air: a dot for every station transmitting now, at its locator, coloured by band (the same colours as Heard and Openings). A bigger dot was decoded by more stations. A band can be open with nobody on it: the dots show where people are actually transmitting, which many contesters use to judge a band.
- Near you: a table in the map key, one row per band: how many stations are on the air (On air), how many stations and countries the receivers near you decode (Heard here, Countries), the farthest one (Farthest, in km) and the farthest place that decodes your area (Reach). It is close to what your own radio would decode right now, without having to listen.
- My own radio (WSJT-X) (Premium, desktop app): every station that WSJT-X decodes on your own radio gets a diamond on the map in the band colour, with a line from your QTH. It shows what you really hear right now, next to what the receivers near you hear: a quick check of your own propagation and antenna. Point at a diamond for the callsign, country, signal report (dB), how many times it was decoded and the distance. The map key gets a My radio ◆ column: how many stations per band and the farthest one. A hollow diamond means the station has not sent its locator yet, so it is shown in the middle of its country. Countries you still need get the gold ring.
Turn it on: Settings › Activity › Digital › My own radio (WSJT-X) › tick Show the stations my own radio decodes, and turn Digital on. That is all: nothing to set in WSJT-X when it runs on the same computer. The status line shows "Connected to WSJT-X" with your frequency after the next decode period.
With a logger, JTAlert or GridTracker running too: nothing to do. When another program already listens to WSJT-X, DX SkyView reads the same decodes from WSJT-X's own log file (the status then says "through its log file").
WSJT-X on another computer: set its UDP Server (Settings › Reporting) to the address of the computer with DX SkyView, port 2237. JTDX and MSHV: set their UDP Server to 127.0.0.1, port 2237.
DX SkyView only listens: it never transmits or changes anything in WSJT-X.
- Desktop apps: Show: Everything, Only my radio, Without my radio (Premium, desktop app): three buttons in the Digital box on the map choose what you see with one click. Everything shows the stations on the air from PSK Reporter together with the stations your own radio decodes. Only my radio leaves just your own WSJT-X decodes (the diamonds and their lines from your QTH). Without my radio shows only the PSK Reporter part. Nothing to tick in Settings.
- The key of the marks: while Digital is on, its box on the map explains every mark that is on the map at that moment: a dot is a station on the air, a diamond with a white edge is a station your own radio decoded at its exact locator, a dark diamond with a coloured edge is one your radio decoded whose locator is not known yet (it is drawn in the middle of its country until the station sends its locator), the curved lines are "from my QTH" and "who decodes whom" (the small ring is the station that decodes), a gold ring is a country you still need, and the dashed circle is "near you". Colours are always the bands. Turn the Digital button off and the key goes with it.
- Who decodes whom: lines from each station to the stations that decode it, for your area or for a place you pick anywhere in the world. Many lines in one direction show a wider band opening. A filled dot at a line's end is the station transmitting; a small open ring is the station that decodes it (it may not be transmitting itself, so it has no dot). A dot without a line is on the air but has no path to your area right now. Lines from the last (2, 3, 5 or 15 minutes, default 5) sets how fresh the lines are: short shows what is open right now.
- Desktop apps: Needed countries (Premium): with your log in My DXCC, stations from countries you still need get a gold ring on the map, are listed in the Needed column, and can give an alert when one is decoded near you.
Desktop apps: (Premium: Near you, Who decodes whom and Needed countries. On the air is free.)
Online map: The online map shows On the air, and Near you and Who decodes whom for our example station in Cyprus. With your own station, and with needed countries from your log, they are in the desktop app.
Turn it on: click Digital on the toolbar.
How to use it: wait a minute or two for the first reports. Read the table in the map key: a band with many stations heard near you and a big Farthest is open from your area; a band with stations on the air but nothing heard here is closed for you. Point at a dot for the callsign, country, band, mode, locator, how many stations decoded it and the farthest one, and whether it is decoded near you.
Choose the bands: use the band chips in the Digital box on the map. Click a chip to hide or show that band; All bands shows them all again. Double-click a chip to show only that band; double-click it again for all bands. With several bands on, the dots come from a light 1% sample of the whole world. With only one band on, Digital shows every station on that band, within seconds, and the box, the lines and the alert are for that band only.
Lines for another place: in Settings › Activity › Digital, type a grid square (for example FN31) or click Pick on the map and then click the place. A yellow dashed circle marks it. Back to my QTH returns to your own area.
Settings: Settings › Activity › Digital: the modes (FT8 and FT4, FT8 only, FT4 only, the chat modes JTTY and JS8, FT8 + FT4 + JTTY + JS8, or all digital modes), how far back to show (5, 15, 30 minutes or 1 hour), the dots on or off, the size of "near you" (300, 500, 750 or 1000 km; 500 km at first), the lines on or off and their place.
Desktop apps: Alert: Settings › Activity › Digital › Needed countries: Off, A new country, or A new country on that band. The alert uses the sound and notification chosen in Settings › Alerts, and comes once per country (or country and band) an hour.
Good to know: the 1% sample shows nearly every active station within 15 minutes, because each one is decoded by many receivers, but its numbers are lower than the real ones. One band on its own uses more internet data. Reports are live and nothing is stored; no callsign or data of yours is sent. Data: PSK Reporter (Philip Gladstone N1DQ), live feed by Tom M0LTE.
POTA and SOTA activations
What it shows: activators on the air now: in parks (Parks on the Air, green triangles) and on summits (Summits on the Air, orange mountains).
Turn it on: click POTA/SOTA on the toolbar.
How to use it: point at a symbol for the callsign, the park or summit, frequency, mode, when it was spotted and the bearing from your QTH. Callsigns are shown next to the symbols when you zoom in.
Desktop apps: With radio control on (Settings › Radio), click a symbol to tune your radio to it.
Settings: Settings › Activity › POTA and SOTA: show parks and summits, only parks or only summits; every band or only the bands you chose for the cluster; callsigns when zoomed in.
Good to know: the spot lists are read every 2 minutes; an activator stays on the map up to an hour after the last spot. Spots: Parks on the Air (pota.app) and Summits on the Air (sota.org.uk).
Space weather and X-ray
What it shows: the panel below the map: Kp (0–2 quiet, 5+ storm), Solar flux (higher is better for high bands), A index (lower is better), Sunspots, MUF at your QTH, and X-ray: the solar flare class (A, B, C, M, X) and the NOAA R scale.
Radio blackouts: at R1 or more, the daylight side of the map is shaded red, because HF there may be weak or gone for minutes to hours. (Desktop) R2 or more gives an alert.
Settings: Settings › Data: refresh interval and the source for Kp, A, sunspots and flux (NOAA or GFZ Potsdam).
Antennas by band (Premium)
What it does: sets the antenna on each band, so predictions use its real gain at every take-off angle.
How to use it: Settings › Station › Antennas by band: choose the type and height above ground. A low horizontal antenna favours short, high-angle paths; a high one favours long, low-angle paths. A ground-mounted vertical ignores the height. Other lets you enter a fixed gain. Use the 160 m antenna on all bands copies one setting everywhere.
Good to know: 6 m can be set but isn't predicted (ITU-R P.533 covers up to 30 MHz).
Antenna rotators (Premium, desktop app)
What it does: shows each antenna's beam on the map and turns it from the map.
Turn it on: connect the controller by USB and switch it on. Settings › Rotators › Add rotator. Give it an antenna name and a colour.
Settings:
- Controller: Yaesu GS-232B (G-450, G-800, G-1000, G-2800 with GS-232B, ERC or K3NG interfaces; GS-232A if set so), Prosistel (D and F; if set to Yaesu emulation choose GS-232B), Hamlib rotctld (address, usually localhost:4533), or Simulator to try it out.
- Serial port and Speed as set in the controller (often 9600 or 4800).
- Beam width (60° suits a typical Yagi), Rotation range (0–450° with overlap) and Calibration offset.
- Beam line thickness (1 thin to 8 very thick, 3.5 by default): how thick the heading line is drawn. It has a dark outline, so it is easy to see on any map colour.
- Soft start and stop (Yaesu GS-232 with speed control, such as G-1000DXC/DXA). Prosistel ramps by itself.
How to use it: right-click a country, spot or place on the map and choose the antenna to turn there. Or type a heading in the heading box at the top right and press Enter. Stop stops all rotators.
Good to know: the heading box turns red with a message if the controller doesn't answer: check the port, speed and controller type.
Rotator dial (Premium, desktop app with rotators)
What it shows: a small compass for each rotator, with the antenna's name and colour. The solid hand and the shaded wedge show where the antenna points and its beam width; the number shows the heading.
Turn it on: it appears as soon as a rotator is added. Settings › Rotators › Show a dial on the map (on by default) and Dial size (Small, Medium, Large, Extra large) for each rotator.
How to use it: click anywhere on the circle to turn the antenna there. A dashed line shows the target until the antenna gets there. − and + turn it 5° at a time; Stop stops it.
Move it: drag a dial by its name to move it, at any time (Settings › Map › Move the panels works too). Each dial remembers its place; Put the panels back returns them to the bottom right.
Good to know: the dial adds to the beam on the map, right-click › turn the antenna, the heading box and Stop; they all still work. A rotator that isn't connected shows "Not connected" and can't be turned.
Radio control (CAT) (Premium, desktop app)
What it does: shows your radio's frequency and mode on the map, tunes the radio when you click a spot, and can make the map, the cluster and Digital follow the radio's band.
The quick way: Find my set-up. Settings › Radio › tick Use radio control. That is all: DX SkyView looks for about 15 seconds and sets everything for you. The button Find my set-up makes it look again, for example after you changed something in the shack. There is nothing to choose:
- First it looks for a program that already has the radio and is running: N1MM Logger+, DXLog, N3FJP, DXLab Commander, Ham Radio Deluxe, OmniRig, flrig or a rigctld. If it finds one, it connects through it.
- It also sees which programs that can take the radio from DX SkyView are running (WSJT-X, JTDX, JS8Call, fldigi, Log4OM, CQRLOG, MacLoggerDX) and tells you the one line to enter in each.
- If none is running, it looks for the radio itself on the USB and serial ports. It tries the usual speeds, asks the radio what it is (Yaesu, Kenwood, Elecraft and Icom radios answer), and connects with the right model, port and speed. The rotators' ports, Bluetooth ports and the radio's keying port (the "Standard" port of a two-port USB radio) are left alone.
- Then it tells you in plain words what it found, for example "Connected to your radio (Yaesu FTDX-101D) on COM12", and what to enter once in WSJT-X or your logger to share the radio (the address has a Copy button).
- More than one radio? When several radios answer, DX SkyView does not guess: it lists them and you click the one to use. The list stays there, so the other radio is one click away.
- Who is using the radio: when DX SkyView has the radio, the list Using the radio through DX SkyView under the green line shows every program that is connected (WSJT-X, N3FJP, a logger), each with its own state. A program that is running but not connected is shown with the one line to set in it.
- What it looked at: after a search the result ends with the ports it looked at and what answered on each, so you can see why a radio is missing (switched off, or its port held by another program).
- With N1MM Logger+ or DXLog running, DX SkyView opens no COM port at all. The logger has the radios and their keying ports, so DX SkyView connects only through the logger (its Radio broadcast). If the broadcast is off, Find my set-up tells you where to switch it on. This also holds when DX SkyView starts: it does not reopen the port it used last time while the logger runs.
- DX SkyView never keys the radio. It opens the radio's port itself and holds the RTS and DTR lines off; the built-in radio driver only gets the data and never touches the port. So a radio that is set to transmit on those lines (for example a TS-590SG set up for digital modes over USB) is not keyed. A radio or cable that needs them: Set it up by hand › Control lines (RTS / DTR). Unticking Use radio control closes the radio's port at once. A program that uses the shared radio connection (WSJT-X for example) can still ask the radio to transmit, as it must to work; if such a program leaves the radio transmitting, DX SkyView tells the radio to receive before it gives up the port.
- A radio that answers only with RTS on (Yaesu radios with menu CAT RTS on, the factory setting): on a Yaesu's own USB CAT port (Windows calls it "Enhanced COM Port") RTS cannot key the radio, so the search tries RTS on there by itself and remembers it. On any other port where nothing answered, the result offers Try again with RTS on: press it only for your radio's CAT port, and turn the power down first if you are not sure. By hand: Control lines › RTS on, DTR off.
- Two radios in N1MM Logger+ or DXLog (SO2R, SO2V): nothing to choose. The map shows whatever the logger reports: one radio in SO1R, both when you switch SO2R on, and the second one goes again when you switch it off. Both frequencies are on the map, with a mark on the one in focus. A click on a spot tunes the radio that is already on that band, so the run radio keeps its frequency; a spot on any other band goes to the radio in focus. With "Cluster spots: show only the radio's band" ticked, the spots of both radios' bands are shown. To follow only one radio: Set it up by hand › Which radio.
- Which program do I start first? The line under the status tells you. When DX SkyView has the radio: DX SkyView first, then WSJT-X and the others. When a logger or radio program has the radio: it does not matter, DX SkyView connects by itself as soon as that program runs.
- If it says a port is held by another program, that program (your logger or WSJT-X) has the radio. Start the logger's link (N1MM Logger+ and DXLog: their Radio broadcast; N3FJP: its API, see below) or close the program, and press the button again.
- When the radio stops answering (for example you closed the map's connection and started your logger instead), DX SkyView looks by itself for a running logger or radio program and connects through it. It tells you when it does. By itself it never takes the radio's cable away from another program; it opens a serial port only when you tick Use radio control for the first time or press the button.
- DX SkyView cannot change the settings of WSJT-X or your logger for you. Those need the address entered once; after that everything connects by itself each time.
Radios that are not recognised (older models, or a radio with its CAT switched off) are set by hand: open Set it up by hand at the bottom of the Connection group, as described below.
Which set-up is mine? Find my set-up chooses for you. This table shows what it chooses and what each program needs once.
| Your programs | Who holds the radio | Set once |
|---|---|---|
| Only the radio | DX SkyView | nothing: press Find my set-up |
| WSJT-X, JTDX, JS8Call, MSHV, fldigi | DX SkyView | in that program: Rig Hamlib NET rigctl, address 127.0.0.1:4532 |
| Log4OM, CQRLOG, MacLoggerDX and other loggers with a Hamlib / rigctld radio choice | DX SkyView | in the logger: Hamlib NET rigctl, host 127.0.0.1, port 4532 |
| N3FJP together with WSJT-X | DX SkyView | N3FJP: API on, Rig Interface None. DX SkyView sends N3FJP the frequency and mode by itself |
| N3FJP alone, with its own Rig Interface | N3FJP | N3FJP: API on |
| N1MM Logger+ | N1MM Logger+ | N1MM+: Broadcast Data › Radio to 127.0.0.1:12060 |
| DXLog | DXLog | DXLog: radio broadcast and Receive Broadcasts |
| DXLab suite | DXLab Commander | nothing |
| Ham Radio Deluxe | HRD Rig Control | nothing |
| Programs that share the radio through OmniRig (Log4OM, Swisslog, HDSDR…) (Windows) | OmniRig | nothing |
| flrig with fldigi or a logger | flrig | nothing |
| MacLoggerDX keeps the radio | MacLoggerDX | MacLoggerDX: Prefs › Station › N1MM UDP |
| A logger with no link at all (for example SkookumLogger) | the logger | give DX SkyView the radio's second CAT port (Set it up by hand) |
Setting it by hand (only when your radio or program was not found): Settings › Radio › open Set it up by hand and choose under DX SkyView reaches the radio through either the radio itself or the program that has the radio:
1. The radio itself: its USB or serial cable (nothing else to install)
DX SkyView talks to the radio itself, with Hamlib built in (more than 300 radios).
- Choose your Radio model (type part of the name in Find a model, e.g. "101" or "TS-590"), the Port the radio's CAT cable is on and the Speed set in the radio's menu.
- Yaesu FTDX101D: the USB "Enhanced" COM port; speed in menu Operation setting › General › CAT RATE (38400 is good). Kenwood TS-590SG: its USB port; speed in menu 61.
- Only one program can hold the radio's port. Let DX SkyView hold it and connect WSJT-X and your logger through it: see Radio, logger and WSJT-X together below. If your logger must keep the radio itself (N1MM Logger+, DXLog, N3FJP), use the logger choice below instead.
- Linux: Linux: if the port can't be opened, add yourself to the dialout group (
sudo usermod -aG dialout $USER) and log in again.
2. A program that has the radio: a logger (N1MM Logger+, DXLog or N3FJP; no cable, no extra program)
The logger keeps the radio. DX SkyView reads the frequency from the logger and asks the logger to tune when you click a spot. It works on the same computer or over your home network, so a Mac or Linux computer can follow a Windows PC that runs the logger.
- N1MM Logger+: in N1MM+ open Config › Configure Ports, Mode Control, Winkey, etc. › Broadcast Data, tick Radio and enter
127.0.0.1:12060. In DX SkyView choose N1MM Logger+ (the ports 12060 and 13064 are filled in). A click on a spot tunes the radio through N1MM+; N1MM+ chooses the mode from its band plan. - DXLog: Options › Broadcast: tick the radio info and Receive Broadcasts. Options › Network configuration: send the radio info to
127.0.0.1:12060and set the listener port to13064. In DX SkyView choose DXLog. - N3FJP (AC Log and the contest loggers): in N3FJP open Settings › Application Program Interface and tick TCP API Enabled (port 1100). N3FJP must have the radio connected (Settings › Rig Interface). In DX SkyView choose N3FJP; the address is 127.0.0.1:1100. N3FJP also sets the mode.
- N3FJP the other way round (N3FJP, WSJT-X and the map together): let DX SkyView hold the radio and set N3FJP's Rig Interface to None, with its API on. DX SkyView then sends N3FJP the frequency and mode all the time, so N3FJP's boxes are right when you log, and a DX spot clicked in N3FJP tunes the radio. Nothing to choose: it starts by itself when N3FJP runs, and it sends nothing while N3FJP has a rig of its own.
- Logger on another PC: enter that PC's address in Logger computer (N1MM+, DXLog) or Address (N3FJP, e.g. 192.168.1.20:1100), and in N1MM+/DXLog send the radio info to this computer's address instead of 127.0.0.1.
- Another program already listens on 12060? In N1MM+ add a second address with a space (
127.0.0.1:12060 127.0.0.1:12061) and enter 12061 in Radio info comes in on UDP port. - Two radios (SO2R, SO2V): Which radio follows the active radio, or always radio 1 or 2.
3. A program that has the radio: a radio program (OmniRig, DXLab Commander, Ham Radio Deluxe, flrig or Hamlib rigctld)
- OmniRig (Windows): OmniRig shares one radio between all programs that use it (Log4OM, Swisslog, HDSDR and many more). Choose OmniRig and DX SkyView joins as one more of them; the radio itself is set in OmniRig. OmniRig, Rig 2 is OmniRig's second radio.
- DXLab Commander: choose DXLab Commander; the address is 127.0.0.1:52002 (Commander's standard port). Nothing to switch on in Commander.
- Ham Radio Deluxe: start HRD Rig Control and connect it to the radio, then choose Ham Radio Deluxe; the address is 127.0.0.1:7809.
- rigctld: for example
rigctld -m 1040 -r COM5 -s 38400(your radio's model number fromrigctl -l, its port and speed). Address: 127.0.0.1:4532. - flrig: start flrig and choose your radio there. Address: 127.0.0.1:12345.
- Both let several programs share the radio, e.g. a logger and DX SkyView.
Radio, logger and WSJT-X together (the usual station)
Only one program can hold the radio's cable, so one program holds it and passes it on to the others. Two set-ups cover almost every station; set each program once and after that just start them.
- DX SkyView holds the radio (WSJT-X, and loggers that can use a Hamlib/rigctld radio: MacLoggerDX, Log4OM, CQRLOG…):
- DX SkyView: tick Use radio control; it finds the radio. The box Your other programs get the radio from DX SkyView shows the address for the others:
127.0.0.1:4532. - WSJT-X: Settings › Radio › Rig Hamlib NET rigctl, Network Server
127.0.0.1:4532, PTT method CAT, then Test CAT. - Logger: choose its Hamlib rigctld / NET rigctl radio, host 127.0.0.1, port 4532.
- Start DX SkyView first. Tuning in any program moves all of them; a click on a spot tunes the radio.
- The logger holds the radio (N1MM Logger+, DXLog, N3FJP, MacLoggerDX): Find my set-up connects to the logger while it runs (kind 2 above). WSJT-X is then run the way that logger describes (N1MM+ and DXLog start it themselves).
- Your own WSJT-X decodes on the map work in both set-ups with one tick: Settings › Activity › Digital › My own radio (WSJT-X). See Digital.
- If another rigctld already uses port 4532 on this computer, DX SkyView shares on 45329 instead; the box in Settings always shows the right address.
The status line under the connection turns green and shows the frequency. Check the connection tells you what is wrong if it isn't.
How to use it: the frequency and mode show at the top of the map. Click a spotted country to tune to its spot (if it has several spots, choose one from the small menu). Click a POTA or SOTA symbol to tune to that activator. The mode is set too: CW, LSB below 10 MHz, USB above, and the data mode for FT8 and other digital modes.
Settings: Settings › Radio › What a click does: click a spot to tune; also set the mode; also turn the antenna (choose a rotator, and it turns to the station when you click). Follow the radio: when you change band on the radio or in the logger, these follow it, each with its own switch: the coverage map and the beacon band; cluster spots (only the radio's band is shown; switch it off to see all your bands again); Digital (only the radio's band, which also gives Digital the full feed for that band).
Good to know: if the status says "not answering", check that the program is running and the address is right, or for the built-in connection the model, port and speed. Drag the map as usual: only a click without moving tunes. Hamlib is free software (LGPL); its licence and source link are in the hamlib folder of the installation.
Licence and free version
- Online map: The online map is the free version from the start: it needs no key and has no trial. Predictions, your own station and the other Premium features are in the desktop app.
- Every feature works for 30 days from the first start. After that DX SkyView keeps running free with the map, greyline, aurora, the MUF map, space weather, beacons, satellites and the DX cluster.
- Premium features need a licence key: predictions (wheel and coverage), your own station settings, My DXCC, LoTW and Club Log, watched callsigns and alerts, Heard, and rotator control. Your settings and log come back as soon as you enter a key.
- To get a key, donate any amount from 5 € to 5B4AOF and include your callsign (Support › Donate for a licence). All proceeds go to station upgrades, maintenance and repairs. The key arrives by email.
- Enter it in Support › Licence…. One key works on 2 computers in total (Windows, Mac or Linux). To move it, deactivate it on the old computer first.
- Move a licence to another computer: on the old computer open Support › Licence…, click Deactivate on this PC and then Yes, deactivate. Then enter the key on the new computer. Deactivating needs the internet.
- Changed your callsign: a licence key belongs to one callsign. Open the licence window (Support › Licence…), click Change callsign, then enter the key made out to your new callsign (write to us for one).
- Back to the map: the Licence page always has a Back to the map button at the top right. Esc does the same.
- Windows: You can also use View › Back to the map (Ctrl+M).
- Linux: You can also use View › Back to the map (Ctrl+M).
Where the data comes from
- Space weather, aurora and X-ray: NOAA Space Weather Prediction Center (GOES); optionally GFZ Potsdam (CC BY 4.0).
- Ionosondes and effective sunspot number: KC2G (prop.kc2g.com), from the GIRO network.
- Predictions: ITU-R P.533 and P.372 software and data by ITU-R Study Group 3.
- Callsign to country: AD1C's cty.dat (country-files.com). Map outlines: Natural Earth. CQ and ITU zones: Wavelog.
- DX spots: the VE7CC cluster node (or your choice); HamQTH as a fallback.
- Where am I heard: PSK Reporter (pskreporter.info) and the Reverse Beacon Network (reversebeacon.net).
- Band openings now and Digital: PSK Reporter (pskreporter.info, Philip Gladstone N1DQ), live feed mqtt.pskreporter.info by Tom M0LTE.
- POTA and SOTA: Parks on the Air (pota.app) and Summits on the Air (sota.org.uk) spot lists.
- DXpeditions: NG3K Announced DX Operations (ADXO, www.ng3k.com), with the kind permission of Bill NG3K.
- Satellites: CelesTrak. Logs: ARRL LoTW and Club Log.
- Desktop apps: Radio control: Hamlib (hamlib.github.io), free software under the GNU LGPL, built into the desktop apps.
Privacy
In short: DX SkyView does not collect personal data. No cookies, no trackers, no ads, and nothing is ever sold or shared.
- Your settings, log and logins (LoTW, Club Log) stay on your computer. A login is sent only to the service it belongs to.
- Online map: we count visits and which features are used, with the visitor's country only. IP addresses are not stored.
- Website: to see how the site is used, we count page visits on dxskyview.com: the page, the visitor's country, language, and whether it is a phone or a computer. We use no cookies, no outside trackers and no scripts for this, and we don't store IP addresses. To count visitors per day we use a code that changes every day and cannot be traced back to you.
- Desktop apps: This app: one anonymous note at the first start (app, version, platform, country) and nothing after that.
- Licence: activation keeps your callsign and an anonymous code for each computer, so one key works on 2 computers.
- Problem reports: only when you send one, with what you choose to include.
- Desktop apps: After a crash: if DX SkyView did not close normally, it asks once whether to send its log. It is sent only if you click Send the log. Switch the question off in Settings › Data › Ask to send the log after a crash.
- Live data (DX cluster, space weather, PSK Reporter, POTA/SOTA and others) comes straight from those services. Heard sends your callsign to PSK Reporter and the Reverse Beacon Network to ask for your reports.
Troubleshooting
- "missing: …" in the space weather panel: a data provider did not answer. It tries again at the next refresh.
- The prediction wheel says the ITU data could not be downloaded: check the connection and reload. The quick model (Settings › Station) works without it.
- Cluster offline: the node did not answer; it tries again every minute. Choose another node in Settings › Cluster.
- Windows: Cluster stays offline: Windows Firewall may block telnet. Allow DX SkyView in Windows Firewall.
- Heard shows nobody: check your callsign in Settings › Station, and that you have transmitted in the last hour on a mode the skimmers and PSK Reporter users hear (FT8, CW).
- No DXpeditions on the map: check that the DXpeditions button is on. If the legend says "DXpedition list not reachable", ng3k.com did not answer; it tries again within 15 minutes.
- LoTW line is red: check the username and password on lotw.arrl.org, then click Connect again.
- Club Log line is red: the token may be deleted (Club Log removes tokens unused for six months) or the callsign is not on your account. Make a new token in Club Log › Settings › API, paste it and click Connect again.
- Windows: The computer freezes while DX SkyView runs: first make sure View › Use graphics card is not ticked (it does not make the map sharper and is off unless you turned it on; if the graphics driver crashes, DX SkyView turns it off by itself for the next start), and update the graphics driver and, if a rotator is connected, the driver of its USB serial adapter (Prolific or CH340 adapters with old drivers are a common cause). Rotator ports are closed while the computer sleeps and opened again after it wakes. After a restart, use Support › Report a problem: the app's log notes its memory every 10 minutes and that the last run did not end normally, which helps us find the cause.
- Linux: The computer freezes while DX SkyView runs: make sure View › Use graphics card is not ticked, and update the graphics driver. Rotator ports are closed while the computer sleeps. After a restart, use Support › Report a problem: the app's log shows how it was doing before the freeze.
- Mac: The Mac freezes while DX SkyView runs: rotator ports are closed while the Mac sleeps and opened again after it wakes. After a restart, use Support › Report a problem: the app's log shows how it was doing before the freeze.
- Desktop apps: Something else: Support › Report a problem sends us your description and the app's log.